Founded in 1998, China Qiangda Power Tools Manufacturer. is mower deck manufacturer and wholesaler in China. We provide hundreds of different kinds of high-performance power tools to you, most of our mower decks products respectively with GS/CE/EMC/LICE /UL/CSA, etc.

MOWER 48" BELLY MNT DECK
Excees OEM Specs
1 Year Warranty
15 1/2" Long 5/8 star Center Hole 2 1/4" Wide you need 3 for a set. 1 year warranty Ready to mow Grass
Another cause of both streaking and step cutting is the design of the tractor and deck themselves. If the operator does not over lap the cutting row enough or makes very tight turns marks can be left in the lawn. The easy way to see the cause of this is to use a jack to raise one rear wheel of the tractor a little off the ground. If your tractor does not have a full free floating deck doing this will cause the deck to tilt. This tilting in tight turns and when one wheel is lifted higher than the other by uneven ground contours will leave marks. Sorry but the only fix for this is slow down, make wide turns, over lap cuts more or buy another tractor with a free floating deck.
Scalping is the one thing that I bet everyone has done at least a few times. Scalping is when the mower deck comes close to or hits the ground. Scalping can be caused by the mower deck misadjustment, unevenness in the lawn, or by mower deck bouncing because the ground speed is to fast. So Check the items above for a mechanical problem. Slow down or raise the deck if its just to low. If that doesn't fix the scalping you need a landscaper not a mechanic like me. Happy Mowing.

Husqvarna Estate Zero-Turn Mower - 61in. Deck, 24 HP
24 HP Kohler V-Twin engine w/electric start
Long-life drive system
5-gallon fuel tank
Electric clutch PTO
Adjustable and ergonomic steering levers
Husqvarna Zero-Turn mowers are heavy-duty, stick-controlled mowers for professional and semi-professional use. Their powerful engines, reliable functions, compact design, and labor-saving features make them suitable for both professional and residential use. U.S.A.
Shipping Weight: 630 pounds
Streaking is another common complaint. Streaking is when thin strips of uncut grass are left behind the mower. Streaking is usually caused by operator error or poor blade maintenance. Streaking can occur if the engine speed is too low. All mowers are designed to run at full throttle. Believe it or not you are doing more harm to your engine by running it slower than wide open when you are mowing. Plus engineers spent a lot of time designing your deck to give the best cut at that blade tip speed. Blades need to be spinning at the correct blade tip speed. They need to be sharp and not have too much wear on the uplifts. The speed and uplifts pull the grass up just like the barber lifts your hair up with a comb to get a straight cut. The air movement within the cutting deck is very important. Decks plugged with grass clippings can not move the air the way they were designed to do.

Also you can visit China Tools&Hardware Manufacturer Catalog or China Tools&Hardware Products Catalog to find more China Products!